Cylinder Block for 2014 Dodge Charger
SERVICE WARNING: If The Original Engine Has Experienced A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure -The Intake Manifold Must Be Replaced With A New Manifold.
Oil Galley Block Off. Mega Cab. [.375x18x1.343]. Oil Gallery Block Off. [.375-18x1.343]. [.375x18x 1.343]. Lifter Gallery. [.375x18x1.34].
All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. Item 13 Also Contained in Short Block Engine Kit. Mega Cab. Cylinder Block To Transaxle. Block To Transmission. Cylinder Block To Head. Engine Block To Clutch Housing.
[m47.93 od 6.4 thk 51.5 flg od]. Lifter Yoke To Cylinder Block. Mega Cab. Camshaft. [.415x.28].
Cylinder Block to Clutch Housing. Block To Head. [.25x.75]. Or Transmission Housing. Cylinder Block to Transmission. 1/2 x 3/4.
M6x1.00x28.00. M6x1.00x24.00. M6x1.0x24.0. Rear Mail Oil Seal Retainer To Crankshaft. Rear Cranshaft Oil Seal Retainer To Cylinder Block.
Plug, Right And Left
After 6/14/04. After 4/26/04. Mega Cab. Coolant Drain [.25x18x.69]. 0.250-18x.690. Cylinder Block Water Jacket Drain. Oil Gallery, Front. Right And Left Cylinder Block Coolant Drain.
Main Bearing Cross. Bearing Cap To Engine Block. Main Bearing Cap Side Bolt. [M8x1.25x45.00].
Not Interchageable With 2012 And Below Crankshaft. New Part Number For 2013. Not Compatable With 2012 And Below Crankshaft. Not Interchanable With 2012 And Below Crankshaft.
Automatic Transmissions. Installation. Also Serviced in Crankshaft Assembly. Crankshaft Pilot.
M12x1.75x91.50. M12x1.75x89.10. M12x1.75x91.2. Bearing Cap To Engine Block. For Main Bearing Cap. [M12x1.75x91.5]. Main Bearing Cap To Engine.
M12x1.75x1.25x152.10. M6x1.00x18.00. M12xm8. M12&M8; Oil Pickup Tube To Main Bearing Cap.
M6x1.00x20.00. M6x1x20. Mega Cab. Cylinder Block Heater. Block Heater to Block. Quad Cab. Regular Cab.