Air Conditioner and Heater Plumbing for 2019 Dodge Challenger
Hose Clamp
Power Steering Hose To Reservoir and Pump. 26 mm Diameter. [Open DIameter = M26.0 THK=1.30]. Oil Cooler To Water Inlet. Return Hose to Pump.
27x15. Power Steering Hose To Power Steering Pump and Reservoir. Hose to Cooler and Reservoir. M28.9 x 1.60. Ais hose. Cool Ret Hose/Pres Btle. Convertible.
M18.5. Hydro-Booster Reservoir Hose. Hose to Tube Connection. Line Module P/S Press and Return Line. Return Hose To Pump. Bootster to Return Hose.
10mm ID. 8.6mm id. Condenser End. Drier End. Drier to Condenser. Expansion Valve End. Liquid line to Drier. After 8/21/08. 3/8". Condensor end.
3/4". Suction Line to Accumulator. Expansion Valve End. Accumulator End After 5/27/08. Drier End. At Expansion Valve. After 6-17-08. Suction line to H-Valve.
Round 1/2in. Condenser End. Discharge line to Compressor. Receiver Drier. 1/2".
[xdk,nmb,nmc]. With Drier - NOTE: 25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
With Drier - NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
3/4". Suction Line to Accumulator. Expansion Valve End. Accumulator End After 5/27/08. Drier End. At Expansion Valve. After 6-17-08. Suction line to H-Valve.
With Drier - NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.