Air Conditioner and Heater Plumbing for 2013 Jeep Patriot

A/C DISCHARGE

68308727aa. On Or After 06/28/2010. Includes: O-ring.

A/c Line Seal

Slim Line. Receiver Drier. 3/8". Liquid line.

M8x1.25x35. Injection Pump to Crankcase. M8x35. Tensioner Attaching. [m8 x 35]. Cylinder Head Two In Right One In Left. Compressor Bracket to Block. Pump and bracket to engine. Engine Lift Bracket.

High Side.

A/C SUCTION

On Or After 06/28/2010.

68308727aa. On Or After 06/28/2010. Includes: O-ring.

After 09/12/11.

This Drier Does Not Have A Tube On The Bottom. Does Not Have A Line On The Bottom.

Drier to Condenser.

Manual Transmission [DD7,DEF]. NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.

Hex Head Bolt And Washer

Camshaft Thurst Plate To Cylinder Head. Front Inner Cover To Cylinder Head. Camshaft Thrust Plate. M8x1.25x25.00. [naa,nae,nas]. Inner Cover To Right Cylinder Head. Timing Belt Cover Inner to Cylinder Head. Outer to Inner. Bracket To Canister.

Low Side.

Round 5/8in. 5/8". Suction line. Serviced with Expansion Valve. Slim Line.

On Or After 06/28/2010.

A/c Line Seal

Round 1/2in. Condenser End. Discharge line to Compressor. Receiver Drier. 1/2".

Switch to Line. Used at Switch. Suction line. For Transducer Valve.

After 09/12/11.

After 10/31/11.

Includes Tube On Bottom Of Drier. Has line on the bottom. After 09/12/11.

NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.

M8x1.25x35. Injection Pump to Crankcase. M8x35. Tensioner Attaching. [m8 x 35]. Cylinder Head Two In Right One In Left. Compressor Bracket to Block. Pump and bracket to engine. Engine Lift Bracket.

Low Side.

Heater Supply Hose

Supply And Return. Includes: Clamps. Up-To [10-17-07] Includes Housing and Seal. After [10-17-07]. Contains adapter and seal.

Includes: Clamps. Up-To [10-17-07] Includes Housing and Seal. After [10-17-07]. Contains adapter and seal.