Air Conditioner and Heater Plumbing for 2013 Jeep Patriot
Round 5/8in. 5/8". Suction line. Serviced with Expansion Valve. Slim Line.
A/c Line Seal
Round 1/2in. Condenser End. Discharge line to Compressor. Receiver Drier. 1/2".
This Drier Does Not Have A Tube On The Bottom. Does Not Have A Line On The Bottom.
Includes Tube On Bottom Of Drier. Has line on the bottom. After 09/12/11.
Includes: Reciever Drier. NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
Manual Transmission [DD7,DEF]. NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
M8x1.25x35. Injection Pump to Crankcase. M8x35. Tensioner Attaching. [m8 x 35]. Cylinder Head Two In Right One In Left. Compressor Bracket to Block. Pump and bracket to engine. Engine Lift Bracket.
Hex Head Bolt And Washer
Camshaft Thurst Plate To Cylinder Head. Front Inner Cover To Cylinder Head. Camshaft Thrust Plate. M8x1.25x25.00. [naa,nae,nas]. Inner Cover To Right Cylinder Head. Timing Belt Cover Inner to Cylinder Head. Outer to Inner. Bracket To Canister.
A/c Line Seal
Round 1/2in. Condenser End. Discharge line to Compressor. Receiver Drier. 1/2".
Round 5/8in. 5/8". Suction line. Serviced with Expansion Valve. Slim Line.
M8x1.25x35. Injection Pump to Crankcase. M8x35. Tensioner Attaching. [m8 x 35]. Cylinder Head Two In Right One In Left. Compressor Bracket to Block. Pump and bracket to engine. Engine Lift Bracket.
Round 5/8in. 5/8". Suction line. Serviced with Expansion Valve. Slim Line.
A/c Line Seal
Round 1/2in. Condenser End. Discharge line to Compressor. Receiver Drier. 1/2".
Includes Tube On Bottom Of Drier. Has line on the bottom. After 09/12/11.
This Drier Does Not Have A Tube On The Bottom. Does Not Have A Line On The Bottom.
NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
Manual Transmission [DD7,DEF]. NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
M8x1.25x35. Injection Pump to Crankcase. M8x35. Tensioner Attaching. [m8 x 35]. Cylinder Head Two In Right One In Left. Compressor Bracket to Block. Pump and bracket to engine. Engine Lift Bracket.
Heater Supply Hose
Supply And Return. Includes: Clamps. Up-To [10-17-07] Includes Housing and Seal. After [10-17-07]. Contains adapter and seal.
Includes: Clamps. Up-To [10-17-07] Includes Housing and Seal. After [10-17-07]. Contains adapter and seal.